■会展中心专用地面插座箱SC—ZW系列

●Special ground receptacle case SC—ZW series for exhibition center

*盖扳采用8mm不锈钢板制作，表面经亚光处理．美观、耐摩擦、耐腐蚀．

*特别设计的密封装置．各部位防护等级达到IP54，

*各承压部件承戴轮压能力不小于5KN．

*出线口采用不锈钢材料。正反使用，用于对强、弱电电缆引出及保护、

*管线平面或楼层下方引上敷设．底座矩形、圆彤线}曾都能联接，

*功能配置：强电主回路漏电断路器保护63A(40A)．分回路断路器保护；

          防水插座32A5P、16^5P、16A3P、≤6只．任意组合；

          弱电标准86型面板．安装位置5位．信息、视，音频，光纤插座O任意组合；

          排水接口1位．

* The cover plate is made of 8 mm stainless steel plate with dull gloss treatment so it is

beautiful, rubbing wearing and corrosion resisting.

* Specially designed sealing device, all parts have protection class of IP 54.

* The pressure-bearing ability of all wheels should be no less than 5 KN.

* The wire exit is made of stainless steel and both surfaces of it can be used for extraction

and protection for both power wires and control cables.

* It is laid on the wiring plane or under storey layer upward and can be connected with wire

groove with rectangular or round bottom.

* Functions: 63A (40A) electricity leak breaker protection for main circuit of power supply,

breaker protection for shunt circuit;

Waterproof receptacle 32A5P, 16A5P, 16A3P -< 6 pieces in arbitrary combination;

Model 86 panel for control wiring standard, with 5 positions of installation for information,

audio, video, optical fiber receptacle in any combinations;

Water draining interface Position 1.

混凝土垫底，平面敷设管线，插座箱预埋示意

Schematic drawing for concrete base of plane wiring with pre-buried receptacle case

混凝土垫底，楼层下方引上敷设管线，插座箱预埋示意

Schematic drawing for concrete structure layer with wiring and pipes laid under storey layer upward and pre-buried receptacle case

■会展中心专用地面插座箱SC—ZW系列

·Special ground receptacle case SC—ZW series for exhibition center。

*盖板采用6mm不锈钢板制造．表面经亚光处理，美观、耐摩擦、耐腐蚀。

*喷塑盖板：采用6mm锰钢板制造，表面经喷塑处理，颜色与地沟盖板及地面相同。

*特别设计的密封装置，各部位防护等级达到IP54．

*各承压部件承载轮压能力不小于5KN．

*出线口采用不锈钢材料，正反使用，用于对强、弱电电缆引出及保护．

*适用于地沟上安装．强、弱电缆槽如图所示沿沟内敷设，与插座箱采用软管连接，强、弱电分箱满足抗干扰屏蔽要求

*功能配置：强电主回路、漏电断路器保护63A(40A)．分回路断路器保护；

          防尘防水插座，32A／5P、1 6A／5P、16A／3p、≤5只，任意组合：

          弱电安装位置≤6位、数据、视频、音频、光纤插座任意组合；

          排水接口1位。

* The cover plate is made of 6 mm stainless steel plate with dull gloss treatment so it is

beautiful, rubbing wearing and corrosion resisting.

* The plastic-spraying cover is made of 6 mm manganese steel plate with plastic spraying

treatment and same color of ditch cover and ground.

* Specially designed sealing device, all parts have protection class of IP 54.

* The pressure-bearing ability of all wheels should be no less than 5 KN.

* The wire exit is made of stainless steel and both surfaces of it can be used for extraction and

protection for both power wires and control cables.

* It is suitable for installation on the ditch and power wires and control cables are laid in

grooves along the ditch and connected with receptacle by hose. Power wires and control cables

should be separated in case to meet requirement of anti-interference.

* Functions: 63A (40A) electricity leak breaker protection for main circuit of power supply,

breaker protection for shunt circuit;

Dustproof and waterproof receptacle 32N5P, 16N5P, 16A/3P ≤5 pieces in arbitrary combination;

Installation of control cables ≤ 6 positions for data, audio, video, optical fiber receptacle in

any combinations;

Water draining interface Position 1.